MK112 Heavy Duty Guyed
Mast
For Fixed Base Use
Permanent Mounting
NVIS and Inverted
Vee
- 24 Ft Heavy Duty Base Mast Kit
|
Heavy Duty Pole
|
Barker & Williamson's MK112 heavy duty base
fiberglass mast
systems provide a reliable means of supporting our broadband antennas in permanent locations from the ground.
Configurations are
available for both NVIS and long range use.
Mast poles are made in 6 foot sections.
They are easily assembled with an inner joiner, and bolted together.
A locator pin is hammered into the ground to stabilize the bottom of the
assembly. Polyester guy lines are provided, which won't stretch, rot, or
degrade in UV. Aluminum ground stakes are included which won't
corrode.
The material utilized for the pole sections is
a composite known as FRP - fiberglass reinforced plastic. Unlike cheap
"fishing pole" material it is extremely
lightweight, strong, and rigid. The light green color is throughout the material - no
chipping paint. Also, shock hazards are eliminated.
Part Number Selection
These masts come several different
ways. Please read carefully to make the proper selection for your intended
use. These are intended for permanent base uses.
|
Base 'from the
ground'
Uses
|
|
These mast kits are designed to
support all of our broadband antennas. They may also be used to
support various other antennas. Please check with the factory for
intended usage.
These kits have 6 Ft
mast sections which are bolted together - no pins or lanyards on
these models. All mast tops
have a halyard pulley. Kits
DO NOT include carry bags.
|
MK112-312B-LG |
Complete NVIS setup for our BWD/BWDS folded
dipole antennas. Includes three 12 Ft mast kits. (Order
MK112-CM seperately.) |
| MK112-324B-LG |
Complete Long Range setup for our BWD/BWDS
folded dipole antennas. Includes two 12 Ft and one 24
Ft mast kit. This may be used for NVIS, or pull the
center up higher for an inverted Vee. (Order
MK112-CM seperately.) |
| MK112-112B-LG |
One 12 Ft mast kit only. Use this to
run NVIS when you have a support such as the side of a building or tree. |
| MK112-124B-LG |
One 24 Ft center mast kit only. This
may be used to support our end-fed Vee antennas in the middle. |
Specifications:
- Pole Size
1-1/2" dia, 1/4" wall
- Color
Light Green
- Height
Up to 24 Ft
- Guy
Spread
Half the height
- Guy
Tension
5 - 10 Lbs
- Head Load
15 Lbs Max
- Wind
Loading
12Ft @ 50 MPH is approx 12 Lbs sideways
-
24Ft @ 50 MPH is approx 24 Lbs sideways
- Weight
12 Ft Mast weighs 10 Lbs
-
24 Ft Mast weighs approx 20 Lbs
Copyright © 1997 - 2008
Barker & Williamson - All rights reserved |
