B & W will be closed from 5/25 - 6/11. No shipments will be made during this time.
HD Base Mast Kit
MK112 Heavy Duty Guyed Mast
For Fixed Base Use
NVIS and Inverted Vee
Barker & Williamson's MK112 heavy duty base fiberglass mast systems provide a reliable means of supporting our broadband antennas in permanent locations from the ground. Configurations are available for both NVIS and long range use.
Mast poles are made in 6 foot sections. They are easily assembled with an inner joiner, and bolted together. A locator pin is hammered into the ground to stabilize the bottom of the assembly. Polyester guy lines are provided, which won't stretch, rot, or degrade in UV. Aluminum ground stakes are included which won't corrode.
The material utilized for the pole sections is a composite known as FRP - fiberglass reinforced plastic. Unlike cheap "fishing pole" material it is extremely lightweight, strong, and rigid. The light green color is throughout the material - no chipping paint. Also, shock hazards are eliminated.
These mast kits are designed to support all of our broadband antennas. They may also be used to support various other antennas. Please check with the factory for intended usage.
These kits have 6 Ft mast sections which are bolted together - no pins or lanyards on these models. All mast tops have a halyard pulley. Kits DO NOT include carry bags.
|BASE 'FROM THE GROUND' USES
||Complete NVIS setup for our BWD/BWDS folded dipole antennas. Includes three 12 Ft mast kits. (Order MK112-CM seperately.)
||Complete Long Range setup for our BWD/BWDS folded dipole antennas. Includes two 12 Ft and one 24 Ft mast kit. This may be used for NVIS, or pull the center up higher for an inverted Vee. (Order MK112-CM seperately.)
||One 12 Ft mast kit only. Use this to run NVIS when you have a support such as the side of a building or tree.
||One 24 Ft center mast kit only. This may be used to support our end-fed Vee antennas in the field.
Pole Size 1-1/2" dia, 1/4" wall
Color Light Green
Height Up to 24 Ft
Guy Spread Half the height
Guy Tension 5 - 10 Lbs
Head Load 5 Lbs Max
Wind Loading 12Ft @ 50 MPH is approx 12 Lbs sideways
24Ft @ 50 MPH is approx 24 Lbs sideways
Weight 12 Ft Mast weighs 10 Lbs
24 Ft Mast weighs approx 20 Lbs
24 Ft Heavy Duty Base Mast Kit
Heavy Duty Pole
Part Number Selection
These masts come several different ways. Please read carefully to make the proper selection for your intended use. These are not intended for permanent base uses - utilize the MK112 series instead.